free shipping on orders over $75

phone: 864-351-4117

MINI Cooper N12 B-Spec Race Engine | SneedSpeed

$6,295.00
No reviews yet Write a Review

SKU:
N12Bspec

N12 SneedSpeed B-Spec Race Engine

SCCA B-Spec · Stock-Spec Competition Engine · Race Proven

The SneedSpeed N12 B-Spec Race Engine is a purpose-built competition long block developed specifically for MINI Cooper R55–R57 models competing in SCCA B-Spec road racing.

Unlike traditional race engines built around forged internals, aggressive camshafts, ported cylinder heads, and increased horsepower, B-Spec racing requires an engine that remains fundamentally stock.

That changes everything about how you build a competitive race engine.

In B-Spec, you cannot simply buy your way to more horsepower with exotic engine components. Performance comes from precision machine work, correct clearances, excellent ring seal, oil control, and consistent engine operation under sustained racing conditions.

The SneedSpeed B-Spec engine is built to make the most of the factory N12 engine configuration while maintaining the stock-based specifications required for competition.

This is not a street engine with a racing label. It is a stock-specification engine assembled with the precision and attention required for competitive road racing.


Stock Specifications. Race Engine Precision.

The SneedSpeed N12 B-Spec Race Engine retains the factory-based engine configuration required for B-Spec competition.

There are no aggressive aftermarket camshafts, oversized valves, ported cylinder heads, or high-compression performance pistons.

Instead, our focus is on getting every detail of the original engine right.

  • Precision cylinder machining and honing

  • Correct piston-to-wall clearances

  • Proper piston ring fit and sealing

  • Blueprinted bearing clearances

  • Balanced rotating assembly

  • Correct oil control

  • Reliable timing system operation

  • Proper cylinder head sealing

  • Consistent assembly and inspection standards

When the engine specifications are tightly controlled by racing regulations, the quality of the machine work and assembly becomes even more important.

The advantage is not exotic parts. The advantage is building the stock engine correctly.


Built From Real B-Spec Racing Experience

SneedSpeed builds, races, and supports MINI Cooper B-Spec race cars.

Our N12 engine program is developed from actual competition experience, where engines are subjected to sustained RPM, repeated heat cycles, aggressive braking, hard cornering, and extended operation under racing loads.

These conditions expose weaknesses that may never appear during normal street driving.

We know where N12 engines wear, where they lose efficiency, and which assembly details matter most when the engine is expected to operate at the limit.

That experience directly influences how every SneedSpeed B-Spec race engine is inspected, machined, and assembled.

Our objective is simple: produce a consistent, reliable, stock-specification engine capable of performing throughout an entire race weekend.


Precision Engine Block Preparation

Every SneedSpeed B-Spec engine begins with a complete inspection and preparation of the N12 engine block.

The block is machined and assembled to maintain the required factory dimensions and applicable competition specifications.

Engine Block Preparation Includes:

  • Complete N12 engine block inspection

  • Precision cylinder honing

  • Verification of cylinder straightness and roundness

  • Inspection of block deck and sealing surfaces

  • Measurement of piston-to-wall clearances

  • Verification of main and connecting rod bearing clearances

  • Inspection and preparation of oil passages

  • Final cleaning and inspection before assembly

The goal is to create a stable, accurately assembled engine that maintains consistent operation during sustained racing conditions.


Stock-Based Rotating Assembly

The B-Spec engine retains the factory-style rotating assembly configuration rather than relying on aftermarket performance components.

SneedSpeed focuses on component condition, balance, clearances, and correct assembly.

Rotating Assembly Features:

  • Factory-specification pistons

  • New piston rings

  • OEM-style connecting rods

  • Factory-specification crankshaft

  • Balanced rotating assembly

  • New engine bearings

  • Precision-verified bearing clearances

  • Stock compression specification

Every component is inspected and assembled with attention to friction, sealing, and durability.

The objective is not to increase power through prohibited modifications. It is to ensure the factory engine configuration operates as efficiently and consistently as possible within the applicable rules.


Factory-Specification Cylinder Head

The N12 B-Spec engine retains a stock-specification cylinder head.

Unlike our H-Production and other modified race engines, the B-Spec engine does not rely on porting, polishing, oversized valves, or aftermarket performance camshafts.

Cylinder head preparation focuses on restoring proper factory operation.

Cylinder Head Features:

  • Fully inspected and remanufactured N12 cylinder head

  • Factory-specification intake and exhaust ports

  • OEM camshafts

  • OEM-specification valves

  • OEM-specification valve springs

  • Inspection of valve guides and sealing surfaces

  • Correct factory-style valve sealing

  • Inspection of camshaft and valvetrain components

The result is a properly prepared factory-style cylinder head designed to maintain consistent operation under racing conditions.


Oil Control, Ring Seal & Timing Reliability

An N12 engine operating in competition faces demands far beyond normal street driving.

Sustained high RPM, repeated heat cycles, and extended operation under load place additional stress on the engine's lubrication, sealing, and timing systems.

Our B-Spec engine preparation focuses heavily on these areas.

Critical Assembly Priorities:

  • Correct piston ring installation and sealing

  • Proper cylinder wall finish

  • Precision bearing clearances

  • Inspection of oiling components and passages

  • Reliable timing chain and tensioner operation

  • Correct camshaft timing

  • Proper gasket and sealing surface preparation

  • Final verification of critical assembly measurements

These are not glamorous modifications.

They are the details that determine whether an engine finishes the race.


Engine Specifications

Component SneedSpeed B-Spec Specification
Engine Platform MINI Cooper N12
Engine Type Naturally aspirated
Competition Class SCCA B-Spec
Engine Block Stock-specification, precision prepared
Pistons Factory specification
Connecting Rods OEM-style
Crankshaft Factory specification
Rotating Assembly Balanced
Compression Factory specification
Bearings New, precision fitted
Cylinder Head Remanufactured, stock specification
Intake Ports Factory specification
Exhaust Ports Factory specification
Camshafts OEM
Valves OEM specification
Valve Springs OEM specification
Timing System Factory configuration
Assembly SneedSpeed competition standards
Intended Use Dedicated B-Spec competition

Why B-Spec Engine Building Is Different

In many racing classes, increasing horsepower is a matter of installing larger camshafts, modifying cylinder heads, raising compression, or replacing factory components with aftermarket performance parts.

B-Spec is different.

The rules restrict engine modifications to preserve the stock-based nature of the class.

That means there is no substitute for precision.

Two engines can contain essentially the same factory components but perform differently because of machining accuracy, component condition, sealing efficiency, and assembly quality.

SneedSpeed's approach is to minimize those differences by building every engine to consistent, carefully verified specifications.

We don't try to turn the N12 into something it isn't. We build the best stock-specification competition engine we can.


Applications

Designed for naturally aspirated N12-powered MINI Cooper models, including:

  • R55 MINI Cooper Clubman

  • R56 MINI Cooper Hatchback

  • R57 MINI Cooper Convertible

  • SCCA B-Spec MINI Cooper race cars

  • Other eligible stock-engine competition applications

Vehicle and class eligibility must be confirmed against the current competition regulations.


Built to Race. Built to Finish.

The SneedSpeed N12 B-Spec Race Engine is designed for competitors who understand that winning races requires more than peak horsepower.

It requires consistent engine performance, reliable operation, and the confidence to push the car throughout an entire race.

Every engine benefits from SneedSpeed's experience building and racing the MINI platform, with an emphasis on the details that matter most under competition conditions.

No unnecessary performance parts. No exaggerated horsepower claims. No shortcuts in assembly.

Just a properly prepared N12 engine built for the demands of B-Spec racing.

SneedSpeed N12 B-Spec Race Engine — Stock Specifications. Race-Proven Preparation. Built to Finish.