Step-by-Step Installation Guide for the Eibach Pro-Kit on 2007–2013 MINI R56
Posted by Mamta Sharma on 29th Oct 2026
If your 2007–2013 MINI R56 has too much body roll or a larger wheel gap than you prefer, lowering springs can help improve its stance and handling. The Eibach Pro-Kit 5705.140 is a set of four progressive-rate lowering springs designed for select R56-generation MINI models. These springs lower the vehicle and provide a firmer suspension feel. They are designed to work with factory dampers that are still in good condition. This makes the kit an option for MINI owners who want a sportier setup without moving to a full coilover system.
Installing lowering springs takes care and the right tools. The front springs are under high tension, so safe spring-compressor use is essential. This guide covers what the kit changes, how to prepare for installation, the general installation process, and what to check afterward. You can check fitment and availability on the Eibach Pro-Kit for 07+ R56 MINI product page before ordering.
What Are the Limits of the Factory R56 Suspension?
The factory MINI R56 suspension is designed to balance comfort, handling, and everyday use. However, some drivers may want a lower ride height and a firmer response when cornering.
Common reasons owners consider lowering springs include:
- Large wheel gap: The space between the tires and fenders may look higher than desired.
- Body roll: The car may lean more during sharp turns.
- Soft suspension feel: Some drivers want a firmer response during braking, acceleration, and cornering.
- Appearance: A lower stance can give the MINI a more performance-focused look.
If you want to change the ride height and suspension feel while keeping a spring-based setup, the Eibach Pro-Kit may be worth considering.
What Does the Eibach Pro-Kit Change?
The Eibach Pro-Kit 5705.140 includes four progressive-rate lowering springs. These replace the factory springs and are designed to lower the vehicle. Progressive springs have a spring rate that changes as the spring compresses. This design aims to balance everyday comfort with added support when the suspension is under greater load.
The main changes include:
- Lower ride height: The springs reduce the gap between the tires and fenders.
- Firmer handling: The suspension can feel more controlled during cornering.
- Reduced body movement: The setup is designed to help limit excessive body roll.
- Street-focused use: The kit is intended for road use and can suit drivers who also enjoy occasional spirited driving.
The kit is designed to work with factory dampers. However, your original shocks must be in good condition. Worn or leaking dampers should be inspected before fitting lowering springs.
Who Should Consider This Eibach Pro-Kit?
This kit may suit MINI owners who:
- Want a lower stance and smaller wheel gap.
- Want a firmer suspension feel for everyday and spirited driving.
- Prefer lowering springs over a full coilover setup.
- Have factory shocks that are still in good condition.
Who May Want a Different Suspension Setup?
The Pro-Kit may not be the right choice if:
- You prefer the current ride height and comfort of your factory suspension.
- You regularly drive on rough roads and want a softer ride.
- You need adjustable ride height or extensive suspension tuning.
- Your car is built mainly for track use and needs a more adjustable setup.
Consider your driving needs before choosing a suspension upgrade.
What to Check Before Installation
Good preparation helps prevent problems during installation. Check the following items before removing the factory springs.
1. Confirm Your MINI's Fitment
The SneedSpeed product listing specifies the Eibach Pro-Kit 5705.140 for selected 2007–2013 MINI models. Listed applications include:
- 2007–2013 MINI Cooper Base
- 2007–2013 MINI Cooper S
- 2008–2013 MINI Cooper Clubman
- 2008–2013 MINI Cooper S Clubman
- Selected 2009–2013 John Cooper Works models
- Selected 2012–2013 Coupe and Roadster models
- 2013 MINI John Cooper Works GP
This is not a universal fit for every MINI. Check your exact year, model, and submodel against the product fitment details before ordering.
2. Inspect the Shocks and Suspension Parts
Check the shocks for leaks, damage, and signs of wear. Also inspect:
- Front strut mounts
- Rear shock mounts
- Rubber spring pads and isolators
- Suspension bushings
- Bump stops
- Related mounting hardware
Replace worn or damaged parts as needed. Installing new springs will not fix problems caused by worn shocks or mounts.
If you need replacement dampers, check the available R56 MINI shocks and struts.
3. Gather the Required Tools
You will need the correct tools for your MINI's suspension setup.
Common tools and supplies include:
- Floor jack and suitable jack stands
- Wheel chocks
- Lug wrench or suitable socket
- Metric socket set
- Breaker bar
- Torque wrench
- Suitable spring compressor for the front springs
- Open-end wrenches
- Penetrating oil, if needed
- Safety glasses and gloves
- Shop rags and a container for small hardware
The exact tools may vary by model and the condition of the fasteners. Check the factory service information before starting.
4. Prepare a Safe Work Area
Park the MINI on a level, stable surface. Make sure you have enough room to remove the wheels and work around the suspension. You should also have access to a professional wheel alignment service. An alignment is needed after changing the ride height.
Step-by-Step Eibach Pro-Kit Installation Process
Important: This is a general overview of the R56 suspension installation process. It does not replace the MINI factory service manual or Eibach installation instructions. Follow the correct procedures, torque values, and safety requirements for your exact model.
Step 1: Prepare and Lift the MINI
- Park the car on a flat surface.
- Engage the parking brake and chock the wheels that remain on the ground.
- Loosen the wheel bolts slightly before lifting the vehicle.
- Use the correct lifting points to raise the car.
- Support it securely with suitable jack stands.
Never work under a vehicle supported only by a hydraulic jack.
Step 2: Remove the Wheels
Remove the wheels to access the front and rear suspension. Keep the wheel bolts and other hardware organized. This makes reassembly easier and helps prevent parts from getting lost.
Step 3: Remove the Front Strut Assemblies
The front springs are fitted around the strut assemblies.
The general process includes:
- Remove or move any components that block access to the upper strut mounts, following the service manual.
- Support the hub and brake assembly to prevent unnecessary strain on connected parts.
- Disconnect the required suspension links, wiring, and brackets.
- Remove the strut-to-hub fasteners according to the factory procedure.
- Support the strut assembly while removing its upper mounting fasteners.
- Carefully remove the complete strut assembly.
Do not allow the hub or brake assembly to hang by its hoses or wiring.
Step 4: Remove the Factory Front Springs
The front springs store a large amount of energy. Use a suitable spring compressor and follow its instructions.
- Secure the strut assembly in a stable position.
- Fit the spring compressor correctly.
- Compress the spring evenly until it is no longer pressing against the upper mount.
- Only then remove the upper strut nut.
- Carefully separate the spring and related components.
Never loosen the top nut while the spring is still under tension. A spring that releases suddenly can cause serious injury. If you do not have the correct compressor or experience, have a qualified suspension technician complete this step.
Step 5: Install the Eibach Front Springs
Before installing the new springs, compare them with the original springs and check the Eibach instructions for the correct position and orientation.
- Transfer the required mounts, isolators, and other reusable parts as instructed.
- Position the Eibach spring correctly on the strut.
- Make sure the spring ends sit in the correct locations.
- Reassemble the strut using the specified procedure.
- Tighten the fasteners to the correct factory or manufacturer torque values.
Do not guess torque settings. Use the service information for your exact MINI.
Step 6: Reinstall the Front Struts
Carefully position each assembled strut in the vehicle.
- Fit the upper mounting fasteners.
- Reconnect the strut to the hub carrier.
- Reattach the required links, brackets, and wiring.
- Check that brake hoses and ABS wiring are routed correctly.
- Tighten all fasteners to the specified torque.
Follow the factory installation sequence. Do not leave any suspension or brake-related fastener loose.
Step 7: Replace the Rear Springs
On the R56, the rear springs are separate from the rear shocks.
The general process includes:
- Support the rear control arm with a suitable jack.
- Remove the required lower shock fastener according to the service manual.
- Carefully lower the control arm enough to release the spring.
- Remove the factory spring and note the position of its rubber pads or isolators.
- Install the Eibach rear spring in the correct orientation.
- Refit the original or replacement pads as instructed.
- Raise the control arm and reinstall the required fasteners.
- Tighten everything to the correct factory specifications.
Never lower the control arm without supporting it properly.
Step 8: Check the Suspension and Reinstall the Wheels
Before putting the wheels back on, inspect the work.
Check that:
- All springs are seated correctly.
- Spring isolators and mounts are in place.
- Strut and shock connections are secure.
- Brake hoses and ABS wiring are correctly routed.
- No tools or loose parts remain around the suspension.
Reinstall the wheels and tighten the wheel bolts in the correct sequence using the factory torque specification.
Step 9: Lower the Car and Arrange an Alignment
Lower the MINI carefully and allow the suspension to settle according to the installation instructions.
Then:
- Check the ride height on level ground.
- Inspect tire and wheel clearance.
- Look for any parts that may be contacting the suspension or body.
- Arrange a professional four-wheel alignment.
Do not skip the alignment. Changing the ride height can affect suspension geometry and tire wear.
Common Installation Mistakes to Avoid
A careful installation helps protect your MINI and the new springs. Watch out for these common mistakes:
- Using a spring compressor incorrectly: The front springs are under high tension. Use the correct tool and follow its instructions.
- Skipping the suspension inspection: Worn shocks, mounts, or bushings can affect the result.
- Installing springs in the wrong position: Follow the Eibach instructions for spring orientation and seating.
- Guessing torque values: Always use the correct MINI factory specifications.
- Ignoring wiring and brake hoses: Check that all lines and wires are routed correctly after reassembly.
- Skipping wheel alignment: A suspension change should be followed by a professional alignment.
What to Expect After Installing the Eibach Pro-Kit
After installation, your MINI should have a lower stance and a reduced wheel gap. You may also notice a firmer suspension feel and less body movement during cornering. The exact ride height and driving feel can vary based on the MINI model, existing suspension condition, and other fitted parts.
Keep these points in mind:
- The ride may feel firmer over bumps.
- Lower ground clearance may require more care around steep driveways and uneven roads.
- The condition of your shocks and mounts can affect comfort.
- A professional alignment helps maintain proper handling and tire wear.
Check for unusual noises or signs of contact during the first drive. If you notice clunks, rubbing, or handling changes, have the suspension inspected before continuing to drive.
Frequently Asked Questions
- Will the Eibach Pro-Kit Work with Factory Shocks?
The Pro-Kit is designed to work with factory dampers. However, the shocks must be in good condition. Inspect them before installation and replace any worn or leaking parts. - Is the Eibach Pro-Kit Suitable for Daily Driving?
The kit is designed for street use. It can suit daily drivers who want a lower ride height and a firmer suspension feel. However, the ride may feel less comfortable on rough roads. - How Much Will the Eibach Pro-Kit Lower My R56 MINI?
The exact lowering amount is not stated in the product information used for this guide. Check the latest Eibach specifications for your exact MINI model before ordering. - Do I Need a Wheel Alignment After Installation?
Yes. Changing the ride height can affect suspension geometry. Arrange a professional wheel alignment after the springs are installed. - Can I Install the Eibach Pro-Kit at Home?
Experienced DIY mechanics with the correct tools may be able to complete the installation. However, the front springs are under high tension. If you are not familiar with spring compressors or suspension work, use a qualified workshop. - Does the Eibach Pro-Kit Fit Every 2007–2013 MINI?
No. The product listing covers specific MINI models and submodels. Check the exact year and model in the fitment table before purchasing. - Can I Return My MINI to Its Factory Ride Height?
You can reinstall the original springs if they are kept in good condition. Store the factory springs and any reusable hardware safely.
Conclusion
The Eibach Pro-Kit 5705.140 can be a useful suspension upgrade for compatible 2007–2013 MINI models. Its progressive-rate springs are designed to lower the car and provide a firmer, more controlled feel while working with suitable factory dampers. Before installation, confirm fitment and inspect the shocks, mounts, and related suspension parts. Follow the official installation instructions, use the correct tools, and arrange a professional wheel alignment afterward. Ready to update your MINI's suspension? Check the Eibach Pro-Kit for 07+ R56 MINI at SneedSpeed for fitment details and current availability.
Built from Racing. Proven by Results.