free shipping on orders over $75

phone: 864-351-4117

Step-by-Step Installation Guide for the Fidanza 8.5-Inch Friction Kit

Posted by Mamta Sharma on 28th Oct 2026

A worn clutch friction surface can affect how your vehicle handles power. If you have a Fidanza aluminum flywheel, you may not need to replace the entire flywheel when its friction plate wears out. The Fidanza 8.5-Inch Friction Kit provides a replacement friction surface that helps restore proper clutch engagement. This kit features a heat-treated steel friction plate designed for durability and consistent performance. It also includes new mounting hardware, making it a practical replacement option for compatible Fidanza aluminum flywheels. If you notice clutch slippage, unusual engagement, or visible wear on the friction surface, inspect your flywheel before choosing a replacement. This guide explains how to prepare for the installation, remove the old friction plate, install the new one, and check the assembly.

What Is the Fidanza 8.5-Inch Friction Kit (228591)?

The Fidanza 8.5-Inch Friction Kit is a replacement friction plate kit for compatible Fidanza aluminum flywheels. It allows you to replace the worn steel friction surface without buying a complete new flywheel.

Here are some of its main features:

  • Heat-Treated Steel Plate: Made from hardened steel to support grip and long service life.
  • Precision-Made Surface: Manufactured to provide a suitable clutch contact surface.
  • New Mounting Hardware: Includes replacement fasteners for installing the new friction plate.
  • Replaceable Design: Helps extend the useful life of a compatible Fidanza aluminum flywheel.

Before ordering, check your existing flywheel's part number and fastener arrangement. Do not rely on the vehicle model alone to confirm compatibility.

When Should You Replace Your Flywheel Friction Plate?

The friction plate wears over time as it works with the clutch disc. Regular inspection can help you identify problems before they affect other drivetrain components.

Consider replacing the friction plate if you notice:

  • Visible Wear: Deep grooves, scoring, or heavy wear on the friction surface.
  • Heat Damage: Hot spots or discoloration that may affect clutch contact.
  • Surface Damage: Cracks or other visible defects on the friction plate.
  • Clutch Problems: Slipping or inconsistent engagement that requires inspection of the clutch assembly.

A worn friction plate does not always mean you need a complete flywheel replacement. If the aluminum flywheel is still in good condition, a replacement friction plate may be enough.

However, replace the complete flywheel if it has cracks, serious damage, or other problems that make it unsafe to reuse.

Tools and Supplies Needed for Installation

Before starting, collect the required tools and supplies. Having everything ready can make the installation easier and help prevent mistakes.

Required Tools

  • Fidanza 8.5-Inch Friction Kit (Part #228591)
  • Standard socket and ratchet set
  • Correctly calibrated torque wrench
  • Brake cleaner or another suitable surface cleaner
  • Non-abrasive cleaning pad
  • Clutch alignment tool
  • Suitable hand tools for transmission and clutch removal

Important Preparations

Before installing the new friction plate, make sure:

  • The flywheel has been removed from the vehicle.
  • The existing flywheel is a compatible Fidanza aluminum model.
  • The aluminum mounting surface is clean and free from damage.
  • The new friction plate has the same required fastener arrangement as the original plate.
  • You have the correct Fidanza installation instructions.

Safety note: Transmission removal and flywheel installation require mechanical experience. If you are unfamiliar with clutch work, have a qualified mechanic perform the installation. Never work under a vehicle supported only by a jack.

Step-by-Step Installation Guide for the Fidanza 8.5-Inch Friction Kit

Follow these steps to replace the old friction plate with the new Fidanza friction surface.

Step 1: Prepare the Vehicle

Start by preparing the vehicle for clutch and flywheel removal.

  • Park the vehicle on a level surface.
  • Disconnect the battery.
  • Raise and support the vehicle using suitable lifting equipment and approved support stands.
  • Remove the transmission according to the vehicle manufacturer's service manual.
  • Remove the clutch pressure plate and clutch disc.
  • Keep track of the hardware and component positions during removal.

Always follow the correct service procedures for your specific vehicle.

Step 2: Remove the Flywheel

Once the clutch assembly is removed, access the flywheel.

  • Remove the flywheel mounting bolts using the correct tools.
  • Carefully separate the flywheel from the crankshaft.
  • Place it on a clean, stable work surface.
  • Inspect the aluminum body for cracks, damage, or signs of excessive heat.

Check the flywheel carefully before moving to the next step. Do not reuse a flywheel that has serious structural damage.

Step 3: Remove the Old Friction Plate

Now remove the worn friction surface from the aluminum flywheel.

  • Count the fasteners securing the existing friction plate.
  • Compare the fastener count with the new kit.
  • Remove the old screws or fasteners carefully.
  • If the original plate uses rivets, follow the manufacturer's removal instructions.
  • Lift the old friction plate away from the flywheel.
  • Clean the aluminum mounting surface using brake cleaner or a suitable cleaner.

Avoid scratching or damaging the aluminum surface during cleaning.

Important: Fidanza advises contacting its technical department if the original friction plate and replacement plate have different fastener counts. Do not continue with installation until the correct replacement has been confirmed.

Step 4: Install the New Fidanza Friction Plate

After cleaning the mounting surface, prepare the new friction plate.

  • Make sure both mating surfaces are clean and free from debris.
  • Position the new friction plate on the flywheel.
  • Install it with the countersunk side facing up, as shown in Fidanza's installation instructions.
  • Align the mounting holes correctly.
  • Install the supplied new screws and nuts.
  • Make sure the plate sits flat against the flywheel.

Do not force the fasteners into position. Stop if the holes do not line up or the plate does not sit correctly.

Torque specification: Fidanza's published friction plate instructions specify tightening the friction surface fasteners to 5 ft-lbs. Use the manufacturer's instructions supplied with your kit and confirm that they apply to your exact hardware. Do not use the original article's 16–18 ft-lbs suggestion.

Step 5: Inspect the New Friction Plate

Before reinstalling the flywheel, check the new assembly.

  • Confirm that the friction plate sits flat against the aluminum flywheel.
  • Check that all fasteners are correctly installed.
  • Make sure there is no dirt or debris between the mating surfaces.
  • Inspect the plate for visible damage.
  • Confirm that the installation matches the Fidanza instructions.

If anything looks incorrect, stop and resolve the issue before reinstalling the flywheel.

Step 6: Reinstall the Flywheel

Once the friction plate installation is complete, prepare the flywheel for reinstallation.

  • Clean the crankshaft mounting surface.
  • Check that the flywheel and crankshaft mating surfaces are free from debris.
  • Position the flywheel correctly on the crankshaft.
  • Install the correct flywheel mounting bolts.
  • Tighten the bolts using the vehicle manufacturer's specified torque and tightening sequence.
  • Follow the original Fidanza flywheel installation instructions where applicable.

Do not confuse the friction plate fastener torque with the flywheel-to-crankshaft bolt torque. These are separate specifications.

Step 7: Reassemble the Clutch and Transmission

After securing the flywheel, complete the clutch installation.

  • Inspect the clutch disc and pressure plate for wear or damage.
  • Replace any worn components as needed.
  • Use a clutch alignment tool to center the clutch disc.
  • Install the pressure plate using the correct fasteners.
  • Tighten the pressure plate bolts according to the clutch manufacturer's specifications.
  • Reinstall the transmission and other removed components.
  • Reconnect the battery.
  • Bleed the hydraulic clutch system if required by the vehicle's service procedure.
  • Check clutch pedal movement and engagement before driving.

Follow the vehicle service manual for the correct reassembly process.

Important Things to Remember Before and After Installation

A proper installation helps protect your new friction plate and the rest of the clutch assembly. Keep these points in mind:

  • Check Compatibility: Use Part #228591 only with a compatible Fidanza aluminum flywheel. Confirm the flywheel part number and fastener arrangement before installation.
  • Inspect the Flywheel: Check the aluminum body and mounting surface for cracks, damage, or other defects.
  • Use New Hardware: Install the new fasteners supplied with the kit. Do not reuse old hardware unless the manufacturer specifically permits it.
  • Follow Torque Specifications: Use the correct torque values for the friction plate, flywheel, and clutch pressure plate. Each component has its own requirements.
  • Check Other Clutch Components: Inspect the clutch disc, pressure plate, and related hardware while the transmission is removed.
  • Follow Break-In Instructions: If you install a new clutch disc, follow its manufacturer's break-in recommendations before hard driving.

For additional fitment or installation information, check the product details and manufacturer's instructions before starting the job.

Frequently Asked Questions

1. Does the Fidanza 228591 Friction Kit Fit My Vehicle?

The kit is designed for compatible Fidanza aluminum flywheels. Vehicle make, model, and year alone do not guarantee fitment. Check your flywheel part number, friction plate dimensions, and fastener arrangement before ordering.

2. Can I Reuse the Old Friction Plate Mounting Hardware?

It is best to install the new hardware supplied with the kit. Old fasteners may have wear or damage that can affect proper installation.

3. What Is the Correct Torque for the Fidanza 228591 Friction Plate?

Fidanza's published aluminum flywheel friction plate instructions specify 5 ft-lbs for the friction surface fasteners. Always check the instructions supplied with your kit to confirm the correct specification for your hardware.

4. Do I Need to Replace the Entire Flywheel?

Not necessarily. One benefit of Fidanza aluminum flywheels is their replaceable friction surface. If the flywheel body is in good condition and the correct replacement plate is available, you may only need to replace the friction plate.

5. What Tools Do I Need to Install the Friction Kit?

You need standard hand tools, a suitable torque wrench, cleaning supplies, and the correct tools for removing and reinstalling the transmission and clutch assembly. A clutch alignment tool is also needed during clutch reassembly.

6. How Long Does It Take to Replace the Friction Plate?

The time depends on the vehicle and your experience. Removing the transmission and flywheel usually takes much longer than replacing the friction plate itself. A professional mechanic can provide a more accurate estimate for your vehicle.

7. Should I Replace the Clutch Disc and Pressure Plate at the Same Time?

Inspect both components while the transmission is removed. If either part shows excessive wear or damage, consider replacing it before reassembly. Follow the clutch manufacturer's recommendations.

8. Does the New Friction Plate Need a Break-In Period?

The friction plate itself does not have a separate vehicle break-in procedure specified in the published installation instructions. However, a new clutch disc may require a break-in period. Follow the disc manufacturer's recommendations.

Conclusion

The Fidanza 8.5-Inch Friction Kit offers a replacement option for worn friction surfaces on compatible Fidanza aluminum flywheels. Instead of replacing the entire flywheel, you can replace the friction plate when the aluminum flywheel is still in suitable condition.

Before installation, confirm the fitment, check the fastener arrangement, and inspect the flywheel for damage. Use the supplied hardware and follow the correct manufacturer torque specifications at every stage.

Looking for a replacement friction plate for your Fidanza aluminum flywheel? Visit SneedSpeed to check the Fidanza 8.5-Inch Friction Kit (228591), review product details, and confirm compatibility before ordering.

SneedSpeed – Built from Racing. Proven by Results.